Do you think your furnace needs repairing? If yes, then it surely will have lots of dirt and dust buildup unattended for a long time. The thing you need to understand here is, furnace maintenance and repairs are crucial, and you got to take care of the machine right from the beginning itself.
Now, imagine you are renovating your sweet home and confused on how to deal with your furnace machine? A small mistake on furnace handling may end up with giving your arm and leg!
This is what exactly we are going to discuss here on how to save on the furnace repair costs during the home renovation! Let’s get started!
Advance HVAC Planning for the Renovation Work
If you search for Furnace Maintenance Brampton, then it’s important to check if the furnace is working in the right manner.
This is an effective way out to start up with the old house renovation. Discuss your strategy with your HVAC guy in advance in order to plan the things in a better way. Because once all the work is done, modifications could be tricky and impossible in some cases. Better to plan the job rather than regretting the work.
Check the HVAC Furnace seal to avoid leaks
Next step is to check the ducts for any gap, leak or breakage. If the furnace got a hole in it, then dirt/debris can enter the machine and you won’t know about it. Therefore, it would be better if you can close the openings before the condition worsens. Well, if you don’t correct the machine, it will use more of the power without any productive result.
Yes! Your HVAC systems have the air filter which traps all dust for you. However, not changing the filters regularly can make it inefficient. Also, you must change the air filters for all the rooms, not just the one which is being remodeled.
Contact your HVAC friend before the work starts
Another essential point to note. Inform your HVAC contractor about the renovation in advance, so that he/she can make the time for the work.
You can contact Om Heating technician to get more advice on how to deal a furnace for home renovation. Call your HVAC person to look at the machine for any machine problem, and if anything requires to be done before moving the furnace.
A quick tip you can apply for keeping your HVAC unit safe during the construction work – keeping the cutting work outdoors, instead of doing the work indoors.
Close all the vents
Attention please! Did you leave any registers or vents open? Please, close them immediately preventing all the dust and debris from the construction work getting inside the pipes. In case you are not sure if the vents are not sealed properly or not, get in touch with us for more info regarding this.
Turn off the HVAC unit
Something you should never forget amidst all the rush and work. Turn off your air conditioner or furnace system as the construction work is going on.
Read more: How to calculate the energy consumption of a central HVAC system?
Vacuum the space daily
Another key point is to understand the importance of clean space. The more you take care of the cleanliness of your home, the lesser struggles you face during and after the home renovation. Again, you get another reason to keep all the machine vents closed so that no dust enters the machine.
Regular filter checks
While the housework is going on, kindly make sure that all your HVAC filters are maintained well. Even if the HVAC furnace looks tidy, it will surely have lot of particles and dust hidden in between the machine units. It’s your responsibility to take care of them and do necessary replacements as and when required.
Carry out proper inspection while the work is going on
In the end, it’s your work and you are responsible for each work directly or indirectly. You will have to inspect the coils, ducts or the vents time to time, while the renovation is going on. Also, you may consider carrying out duct cleaning and be double sure about the dust level in your home.
In the end, it’s your work and you are responsible for each work directly or indirectly. You will have to inspect the coils, ducts or the vents time to time, while the renovation is going on. Also, you may consider carrying out duct cleaning and be double sure about the dust level in your home.
These are the few important HVAC tips you can focus while carrying out your home renovation.
Quick Summary of maintaining a Safe Furnace During Renovation
- Dust and particles can easily get inside your furnace, so keep all your precious HVAC units closed and covered nicely. Keep all the registers and vents closed, double check it during and after the work.
- Keep your furnace closed and block all the openings so that no dust/dirt enters the machine and clog it up.
- Try to do all the cutting and drilling work outdoors, as much as possible. Along with this, try to vacuum the space in between and keep your surrounding clean.
- Do a furnace filter change after all the home renovation work completes. Your furnace will have all the dust attached on it that will float around in the home. Not only this, you can significantly control the furnace repair costs that you may incur in the future.
You can make a note of the points and follow them for better furnace maintenance. It’s easy to neglect the furnace system while some household work is going on, however you can do it next time! Also, share this piece of info with your friends and family, who may benefit with this added knowledge.
