Electrical Hazards

The Top Seven Electrical Hazards in a Typical Workplace

An employer must be capable of offering his employees with utmost safety from different electrical hazards including burned out bulbs, lack of RCCB etc

Electricity is incredibly beneficial, and unfortunately, no workplace can ever operate without it. Staff members must be capable of identifying as well as regulating different associated hazards otherwise they are at great risk of suffering from shocks or burns. As per the latest research, the construction industry is responsible for approximately 52% of total fatalities occurring in varied offices every year. To know more, please consider checking out below-mentioned pointers right away.

  • Uncovered Junction Box

Uncovered Junction Box

According to Werribee electrical service providers, a junction box is noted for having various wires, all of which remain connected to each other. If this particular box remains uncovered, a person might touch any of the wire, and get hurt. This is also a code violation.

  • Overloaded Circuits and Inadequate Wiring

Using too small or too large wires can compel them to overheat quickly and lead to fires. Always use appropriate wire for operation, and only then the electrical load would be distributed without any hassle. Design an extension cord as per heavy duty usage. Never overload circuit but use breakers to prevent accumulation of current.

  • Improper Grounding

Electrical improper grounding

As per recent studies, a major OHSA violation is improper grounding of different tools in use. Correct grounding can remove unwanted voltage in absolutely no time, and protect workers from electrocution.  Never extract the metallic pin out as it sends unnecessary voltage back to ground.

  • Bulb Burning Out

If bulbs in an office are burning out within very short period, authorities must check following aspects, and fix them as soon as possible.

  • Immensely high wattage
  • Insulation is very close to light
  • Excessive wattage on dim switches
  • Inferior wiring on mains and circuits
  • Over circuited Panel

It is beyond law to install tandem breakers into single slot than many single-pole breakers. The difference between tandem breakers and double pole breakers is that former does not have two slots in one circuit. Although danger level is minimal, resolve the issue by incorporating sub panel with additional slots or getting a bigger model.

  • Overhead Power Lines

Electrical Overhead Power Lines

Overhead energised and powered electrical lines are known for having excessive voltage, which might electrocute workers. Maintaining a distance of approximately ten feet from such equipment is mandatory. To find out overhead power lines before they cause any damage, conduct a thorough site survey.

  • No Residual Current Circuit Breaker (RCCB)

Highly competent Werribee electrical service providers satisfying clients since many years now emphasised on significance of residual current circuit breaker (RCCB), also known as ELCB or earth leakage circuit breaker. It disconnects load from main current supply, thus, ensuring protection against fire.

Knowing limits and practicing safety measures can alleviate chances of hazards stated above to a great extent. It is obviously better to work in accordance with aptitude because carrying out tasks beyond one’s capability paves way for disastrous consequences. If not feeling quite confident, seek professional assistance unhesitatingly. Also rather than relying upon memory, use a digitised checklist, which act as guide for being near electrical equipment.

Leave a Reply