Wiring refers to the system of conductors and other devices that are used to bring electricity. There different kinds of wires which are used and these wires differ according to three aspects, namely purpose, amount of electricity being carried and location.
For example, a home that will need less power than a commercial establishment.
Here, in this post, we will discuss various tips for safe home wiring. Electrical wiring at your home, workplace, or industry is not a simple task. It involves a lot of danger while fitting electricity wiring.
Therefore, you should take the help of professionals like electrician Central Coast NSW, who can efficiently and safely do this task. Follow the below-mentioned tips while installing electrical wires:
- The layout of the Enclosure
- Electrical Safety Codes Should Be Followed
- Pick Big Size of the Enclosure
- Terminals should be used
- Documentation is Necessary
- Finger Trunking
- Pick the Right Cable
- Connect Your Wires to the Main Source OF Power Lines
1. The layout of the Enclosure
It’s a good idea to plan the layout of the termination of your cable, equipment, and circuit protection in the distribution board. Ideally, we suggest that the circuit board should be kept towards the downside of the enclosure with the power supplies.
For cable routing, you should leave some space on both sides of the same enclosure. The low voltage cables should be on the left side of the box, and the high voltage cable should be on the right side.
2. Electrical Safety Codes Should Be Followed
Another prominent aspect of how wires installed at home is that electrical and safety codes should be followed when you are installing wires at home.
Homeowners or any person who doesn’t have sufficient understanding about setting up electrical wires at home must not try to do this work.
There will be a huge possibility of electrocution from incorrectly handling wires or worse, causing a fire because wires were not properly installed.
It is better to employ professional licensed electrician like level 2 electricians at Central Coastdoing the installation of wires to guarantee the safety and prevent hazardous conditions.
3. Pick Big Size of the Enclosure
Choosing an enclosure with plenty of room is recommended. As a matter of fact, this enclosure will be the center of the installation.
Generally, we recommend that you have 20% of additional space for future expansions. Moreover, if your house is newly built, you may want to have sub-distribution boards, as well.
4. Terminals should be used
Ideally, you should go for quality terminal blocks for your enclosure. The benefit of these terminal blocks is that they help you keep the wiring organized.
Aside from this, you may want to use label holders and separators as well. Another benefit of using them is that you won’t have to stuff many cables into a single spot.
5. Documentation is Necessary
Often, most homeowners don’t understand the importance of putting labels on their input and output cables. Labeling will make it easier for you to set up the configuration.
Your electrical system will remain flexible and easy to modify and expand down the road. Moreover, access to the enclosure will also be a lot easier down the road.
6. Finger Trunking
For better organization of the wiring, you should use finger trunking. You can place the trunking between the DIN rails. Keep in mind that the outer trunking has to be twice as big as the other trunking.
7. Pick the Right Cable
Don’t try to save money on the cables as cables are the backbone of the electricity system in any house or office. Ideally, you may want to buy CAT7 cables.
It’s a twisted pair cable with a strong shield around it. It boasts a lower voltage drop and can carry more power.
These cables are better at any perspective. That’s the reason most professionals recommend these cabling for home or office wiring.
Still, if you find any problem, even after installing CAT7 at your house, you can call a good professional like a 24-hour electrician on the Central Coast.
8. Connect Your Wires to the Main Source OF Power Lines
It is important to understand the basic principles of how your wires at home are being installed. The most important information is that all wires from home should be connected to existing power lines in order to get electrical power.
In case you have obtained a new home from housing development, this would not be a problem.
The builders who have secured the lot for the house have already obtained the necessary permits and arrangements to have your house wires be connected to a power source or power lines in your area.
However, if you are planning on purchasing a house that is from an undeveloped raw plot of land, you will have to ensure the availability of an electrical hookup.
Look for somebody who can wire your house immediately to a source power line like emergency Central Coast electricians who are ready to offer their services anytime.
To Conclude
So, these are some easy tips that you can use when doing the electrical wiring in your home. You will be more careful throughout the process.
However, if you have never done any wiring chores before, we highly recommend that you hire a qualified electrician to do the work. This will keep you on the safe side.
